How Fix Wireshark Not Showing Interfaces Windows 10

Wireshark, that is contemplated as the world’s prominent network protocol investigator tool. This software can be utilized for network troubleshooting, communication & software protocol, or analysis.

It has been unceasing for a long period and consistent with several OSes, including Windows, Mac, Linux, Unix. However, recently a huge number of users reported that Wireshark Not Showing Interfaces Windows 10.

It can occur due to a couple of reasons like an incompatibility between your computer systems and Wireshark software. Whatever the reasons behind it,  in this context, we’ll attempt to fix it through some convenient procedures that you can apply hassle-free.

How to Fix Wireshark Not Showing Interfaces Windows 10 [Step By Step]

Wireshark confers different functions, including network analysis, import, export, screen display, and many more. It actually has been successfully running as a network packet analyzer over the years.  Apart from the “No Interfaces Found Wireshark Windows 10”, there is no big issue with this software. However, in this segment, resolving procedures of this issue will be illustrated.

1. Reinstall as Administrator in Compatibility Mode

As we said earlier, due to the incompatibility between your PC version and Wireshark can be the reason for it. If it happens due to the reason, then reinstall it as administrator. If you don’t comprehend how to do it, follow the below instructions to reinstall it as administrator with a number of simple steps.

Step 1: Open the folder first where the “Wireshark” has been downloaded.

Open the folder of Wireshark to Reinstall as Administrator in Compatibility Mode

Step 2: Keep the cursor on the “Wireshark Setup” file and right-click and then select “Properties” below.

Wiresharight-click and select Properties to Reinstall as Administrator in Compatibility Mode

Step 3: From the new pop-up windows, navigate to the “Compatibility” tab.

navigate to the Compatibility tab to Reinstall as Administrator in Compatibility Mode

Step 4: Tick-mark on the “Run this program in compatibility mode for” and select “Windows 10” and then press on the “Apply” and “Ok” from the bottom.

Tick-mark on the Run this program in compatibility mode & select Windows 10 to Reinstall as Administrator in Compatibility Mode

Step 5: Go back to the “Wireshark setup” file under the download folder. Do right-click on the file and then choose “Run as Administrator.”

go to Wireshark setup , right click and click on Run as Administrator to Reinstall as Administrator in Compatibility Mode

Note: Don’t select “WinPcap x.x.x & UsbPcap” during setup Wireshark again.

2. Winpcap Setup

If you have accomplished the first method that we have illuminated, now setup Wincap by executing the below procedure.

Step 1: First, visit the Winpcap official site and then download and install it.

download and install Winpcap Setup

Step 2: Back to the folder where the “Winpcap.exe” file has been downloaded and right-click on it.

right click on the Winpcap.exe

Step 3: Now from the several options, press on the “Properties” from below.

go to properties of Winpcap.exe

Step 4: Now move to the “Compatibility” mode Next to the General.

go to Compatibility mode for Winpcap Setup

Step 5: Check the “Run this program in compatibility mode for” under the  Compatibility mode and then select “Windows 10”. Once it is selected, press on the “Apply” and “Ok.”

Check the Run this program in compatibility mode for windows 10 for Winpcap Setup

Step 6: Back to the “Window.exe” setup file and then right-click on it to run it as administrator.

run Winpcap Setup as administrator

After accomplishing the process, recheck whether Wireshark Not Showing Interfaces Windows 10 remains or not.

3. Resolve the Issue with Command Prompt

If this issue still exists after executing the two procedures, then try this out. Look at the below instruction to fix Wireshark Interface Missing issue with the Command Prompt.

Step 1: Search “CMD” on the Windows option and then run it as administrator.

search for cmd prompt to Resolve the Issue with Command Prompt

Step 2: Now type the below command step by step and press “Enter.”

 type the below command step by step toResolve the Issue with Command Prompt

Step 3: After entering this code, a display will appear where you see if a specific function is working or not. If service doesn’t remain, type the code below, “sc stop npf,” and tap “Enter.”

type sc stop npf and hit Enter to Resolve the Issue with Command Prompt

Step 4: Now enter “sc start npf” next and press Enter.

type sc start npf and hit enter to Resolve the Issue with Command Prompt

Step 5: After completing the process, reload Wireshark and press “F5” on the Keyboard.  We hope it will work again after executing the process.

Frequently Asked Questions

Below, we have conferred answers to some interrogations that will clarify if you have any queries about Wireshark Interface error and its related topic. So let’t check them out.

Can Wireshark Capture All Network Traffic?

There are two types of Wireshark capturing mode available. The first one is  Promiscuous, and the second one is Monitor. The majority of time you’ll see Promiscuous mode. It enables your Network interface to capture all packets on the network segment, besides you can monitor all the network at once.

Is Winpcap Risk-Free to Set Up?

The majority of people get confused whether WinPcap is safe to set up or not. We would like to assure you one thing that, WinPcap is a capture tool that is linked to Wireshark. If you speculate that your data can be stolen, then ignore it while installing Wireshark.

Is it safe to install Wireshark?

A huge number of Network Specialists and software developers recommend installing Wireshark to get network technology updates. If you ask us our opinion, then we’ll recommend installing Wireshark on a hardware node. Keep away from launching it on a container.

Final Verdict

Wireshark  missing interface is a typical issue that the majority of people confront. But this problem is not unsolvable, you just need some effective ways to fix it. We have illustrated how to resolve Wireshark Not Showing Interfaces Windows 10. Three principal steps have been discussed above. We hope by executing the procedure, you can fix the issue. However, if you confront any difficulties while applying the methods, let us know by dropping comments below.   

Hello! This is Denny Davis. I’m a software engineer, specialized in windows and android platforms. The “Fixing Advice” is the site that I specially designed to solve your android and windows related technical problems.

Leave a Comment